Steel PPGI Standing Seam Roll Forming Machine , Standing Seam Metal
Roof Machine High Strength
Description
---- The standing seam panel produced by our standing seam roll
forming machine has high strength with big wave length. It adheres
well to concrete. Used on high building, it not only saves steel
mold plate, but also reduces the weight of roofing. With the same
bearing capacity, it economized steel and cuts down investment
accordingly.
---- The finished products are widely used in building roofing,
after make embossing of the sheet, it will increase the strength
between the steel and concrete, thereby increasing the roofing of
the fastness.
----- Process Flow of standing seam roll forming machine:
Uncoiler -Feeding -Straightening-Roll Forming -Cutting-Exit Rack
parameters
| Raw material |
| Material | Colored steel sheet, galvanized steel sheet, aluminum sheet |
| Thickness of coil sheet | 0.2-0.8 mm |
| Material expand width | 1000 mm |
| Efficiency width | 750 mm |
| Machine details |
| Roller material | High grade NO. 45 forged steel with 0.05mm hard chrome plating |
| Shaft material | High grade NO. 45 carbon wrought steel |
| Cutting blade | Cr12 mould steel with quenched treatment |
| Diameter of shaft | 70mm or as your requirement |
| Main frame | 300 H steel |
| Forming steps | 15 stations |
| Productivity | 8-12 m/min |
| Hydraulic station power | 4+4KW |
| Hydraulic pressure | 10-12MPa |
| Appearance size | 7600mm*1500mm*1500mm |
| Weight | 8-10tons |
| Hydraulic oil | 40# hydraulic oil |
| Electric tension | 380V 50 Hz 3 Phase or as your requirement |
| Cut Mode | Hydraulic forming after cutting off |
| Cutter materia | Cr12 Heat Treatment |
| Electronic control system | PLC, Touch Screen, Encoding counter |
| Color | Blue, green or yellow or as your requirement |
| Rolling material | 45# steel,roller surfaces polishing, hard plating |
| Machine Components |
| No. | Name | QTY |
| 1 | Manual uncoiler | 1 set |
| 2 | Feeding and leveling device | 1 set |
| 3 | Roll forming system | 1 set |
| 4 | Hydraulic punching and cutting | 1 set |
| 5 | Product support frame | 1 set |
| 6 | PLC Control System | 1 set |
Service and Terms
Packing Method
Main machine is packaged with plastic film
Transportation
All machines need one 40 feet container to hold
Payment Term
30% deposit by T/T in advance and 70% balance after inspection
confirmation before shipment.
Delivery Time
Within 35 days after receiving deposit.
Warranty
Two years, and we will provide technical support for wholelife of
the equipment.
If some parts of machine broken within 2 year, we will give
customer the spare parts for free. (include chain, bearing,
roller,oil pipe, counting wheel) If more than 2 year, maybe some
spare parts need to be charged. If machine can not work well, we
can teach them online until the machine is perfect. If you need, we
can go to your place to assist you. But you need to provide the
cost of the engineer.
